TRANSFORMERS & ELECTRICAL COMPONENTS
APPLICATION / 01
Public and commercial parking
For public charging stations, shopping-centre parking and commercial sites. Match the selected power and connector configuration to the available supply and expected vehicle dwell time.
MINGKONGmkelecsolution.com
Product illustration. Actual configuration varies by specification.
Open product image ↗EV Charging Equipment & Parts
MK DC Split 480–1440 · 480–1,440 kW flexible DC charging system
480–1,440 kW flexible DC charging system
480–1,440 kW flexible DC charging system. Central power equipment and separate charging terminals for coordinated station deployment.
- Brand
- Mingkong
- Model
- MK DC Split 480–1440
- Supply
- Charging equipment supply
- Power options
- 480 / 720 / 960 / 1200 / 1440 kW
- Format
- 480–1,440 kW flexible DC charging system
- Ingress protection
- IP54
Price on enquiry · Configuration, quantity & destination
Supply scope, manufacturer information, applicable documents and warranty arrangements are confirmed in the quotation and order.
APPLICATION & DUTY
Where MK DC Split 480–1440 fits
480–1,440 kW flexible DC charging system from the Mingkong charging equipment range. Power cabinets and dispensing terminals are selected separately. Cabinet power must not be interpreted as the output available at every connector simultaneously.
APPLICATION / 02
Fleet and transport facilities
For taxi, commuter, logistics and other fleet charging requirements described in the catalogue. Provide the vehicle list, daily charging schedule and number of simultaneous sessions.
PRODUCT ENGINEERING
Construction & operating functions
DETAIL / 01
Shared power architecture
Power is pooled in a central cabinet and allocated to dispensing terminals. Select total installed power, terminal current classes and simultaneous charging demand as one system.
DETAIL / 02
Demand-based allocation
The catalogue describes allocation according to vehicle demand and battery status. The detailed control strategy and vehicle communication must be agreed for the project.
DETAIL / 03
Modular expansion
A modular architecture is described for staged expansion. Confirm installed modules, expansion headroom, bus capacity and cabinet limits in the offered configuration.
DETAIL / 04
Separate terminal selection
Air-cooled and liquid-cooled terminal alternatives are listed. Their current classes, connector counts, cable system and dimensions must be matched to the power cabinet.
DEFINE THE SELECTED ASSEMBLY
Configuration & installation interfaces
Review site supply, vehicle interfaces, cable reach, mounting and operating-platform requirements together.
Illustrative working scene- Supply and site integration
- Confirm the site voltage, frequency, available transformer capacity and simultaneous charging demand. Upstream switchgear and cable selection depend on the final installation.
- Vehicle connector and charging protocol
- Select the required vehicle interface and charging protocol for the destination. Connector appearance alone does not establish compatibility.
- Network and operating platform
- Confirm the backend protocol/version, SIM or Ethernet arrangement, billing integration and user-access methods. Network connectivity does not by itself confirm backend compatibility.
- Installation and delivery scope
- Agree the charger or cabinet, terminals, cables, foundation interfaces, commissioning documents, spare parts and warranty scope in the quotation.
Installation & connection checklist
- Provide the site single-line diagram, available AC supply, earthing arrangement and upstream protection.
- Confirm vehicle connector standards, DC voltage range and required power per active outlet.
- Provide foundation or wall details, cable routes, ventilation clearances and service access.
- Specify the backend platform, network coverage, authentication methods and local payment requirements.
CHARGING SPECIFICATIONS
Power & technical data
Choose a power configuration, then review the matching supply, interfaces and installation requirements.
| Mingkong catalogue reference | Rated power (kW) | Listed output current (A) | Enquiry |
|---|---|---|---|
| MK DC Split 480–1440 / 480 kW | 480 | — | Request this configuration ↗ |
| MK DC Split 480–1440 / 720 kW | 720 | — | Request this configuration ↗ |
| MK DC Split 480–1440 / 960 kW | 960 | — | Request this configuration ↗ |
| MK DC Split 480–1440 / 1200 kW | 1200 | — | Request this configuration ↗ |
| MK DC Split 480–1440 / 1440 kW | 1440 | — | Request this configuration ↗ |
Mingkong catalogue references identify the configuration for enquiries. Confirm the final ordering code, vehicle interface and technical schedule. Output current, voltage and simultaneous charging limits must be considered together. A dash means no confirmed value is published.
Separate charging terminals
| Terminal class | Connector arrangement | Dimensions | Rated current |
|---|---|---|---|
| Air-cooled 250 A | Single / dual connector | 1480 × 400 × 242.5 mm | 250 A |
| Air-cooled 300 A | Single / dual connector | 1480 × 400 × 242.5 mm | 300 A |
| Air-cooled 400 A | Single / dual connector | 1480 × 400 × 242.5 mm | 400 A |
| Liquid-cooled 600 A | Single / dual connector | 1630 × 600 × 500 mm | 600 A |
| Liquid-cooled 800 A | Single connector | 1630 × 500 × 370 mm | 800 A |
Terminal current ratings are separate from power-cabinet ratings. Final available power depends on output voltage, cable/connector limits and simultaneous sessions.
Electrical supply
| Parameter | Catalogue value |
|---|---|
| Input voltage | 380 V AC ±15% |
| Conversion efficiency | ≥96.5% |
Construction and environment
| Parameter | Catalogue value |
|---|---|
| Catalogue dimensions (mm) | 2400 × 2100 × 900 |
| Ingress protection | IP54 |
| Noise | ≤65 dB |
Operation and connectivity
| Parameter | Catalogue value |
|---|---|
| Charge mode | Automatic charging to full |
| Authentication | RFID card / QR code / password |
| Network | Ethernet / 4G |
Protection
| Parameter | Catalogue value |
|---|---|
| Listed functions | Connector temperature monitoring; overvoltage; undervoltage; overload; short circuit; earthing; overtemperature; low temperature; insulation monitoring; reverse polarity; surge protection; emergency stop; leakage protection. |
System and terminal arrangement
| Parameter | Catalogue value |
|---|---|
| Supported charging connectors | 2–24 |
| Terminal DC voltage range | 200–1,000 V |
Drawings & project documents
Request the selected cabinet and terminal dimensions, cable schedule, connection diagram, commissioning requirements and applicable test documents with your enquiry.
Request matching documents ↗DOCUMENTS · DELIVERY · SUPPORT
Technical coordination & after-sales enquiries
Confirm the order documents
Agree the selected specifications, applicable drawings, inspection records and identification requirements in the quotation and order.
Coordinate delivery
Include quantity, destination, packing requirements and preferred trade terms. Confirm transport scope and the requested delivery schedule with the quotation.
Request technical support
For an existing unit, provide its model, nameplate or order reference and a description of the issue. Include relevant photos or records already available. Warranty and service scope follow the agreed order terms.
Contact about this model ↗DEFINE YOUR CHARGING REQUIREMENT
Request a charging configuration
Price on enquiry
Specify the configuration, quantity and destination. Currency, quotation validity, freight, duties and delivery terms are agreed in the quotation.
Project procurement
New charging sites
Discuss requirements ↗What to prepare
Site plan, available supply, vehicle types, required charging power and destination.
Distributor procurement
Repeat supply requirements
Discuss requirements ↗What to prepare
Power variants, connector standards, quantities, branding and documentation needs.
System integrators
Charging-system integration
Discuss requirements ↗What to prepare
Backend protocol, metering, protection, power allocation and commissioning scope.
Repair & replacement
Existing equipment support
Discuss requirements ↗What to prepare
Nameplate, controller/module version, fault information, connector details and photos.
Illustrative enquiry scenarios.
Charging selection checklist
- Destination country, vehicle types and connector standards
- Required charging power, number of outlets and simultaneous sessions
- Site AC voltage, frequency, available capacity and installation layout
- Backend protocol/version, authentication, payment and documentation requirements
Related catalogue series
MINGKONGmkelecsolution.com
7 kW wall-mounted AC charger
Power options: 7 kW
View specifications ↗
MINGKONGmkelecsolution.com
20–40 kW wall / pedestal DC charger
Power options: 20 / 30 / 40 kW
View specifications ↗
MINGKONGmkelecsolution.com
60 kW integrated DC charger
Power options: 60 kW
View specifications ↗
MINGKONGmkelecsolution.com
120–240 kW integrated DC charger
Power options: 120 / 160 / 180 / 240 kW
View specifications ↗Plan your enquiry
Use these guides to prepare the information for equipment selection and quotation.